3MP 21.3" Monochrome Monitor MS35i2

ms35i2

High-bright 3MP grayscale monitor (For mammography reading with optional Independent Sub-pixel Drive Technology)

In addition to be a standard solution for diagnostic imaging, MS35i2 with Independent Sub-pixel Drive technology enables this 3 MP monitor to render 9 mega sub-pixel images, exceeding the current standards of care for primary mammography diagnosis. MS35i2 with Independent Sub-pixel Drive technology is cleared for FDA (510K) for the use of Digital Mammography.

Features

LED Backlight for Image Stability and Energy Saving

Compared to the conventional CCFL backlight models, MS35i2 saves about 20% energy and will hold brightness much longer. Additionally, mercury-free LED backlight contributes to reduce the environmental impacts.

Built-in Sensor

With two built-in sensors for luminance stabilization and ambient light measurement, CCL196 consistently delivers unmatched image quality.

Remote Calibration

DICOM calibration and conformance check can be remotely performed. These remote management features will minimize the burden of system administrators.

DICOM Conformance Check

User friendly OSD functions include DICOM conformance check function.

Monitor Quality Control

The Medivisor Series software is user friendly tool to effectively manage JVCKENWOOD's displays. Calibration software Medivisor Nx, quality assurance software QA Medivisor and performance monitoring software PM Medivisor interact closely with each other to help system administrators easily manage all JVCKENWOOD's displays in the network.

Special AR Coating for Film-like Black and Improved Sharpness

JVCKENWOODS's new special AR coating technology addresses properties of focus, noise reduction, contrast and viewing angle achieving film-like black and accurate reproduction of images.

DVI & DisplayPort

In addition to a DVI port, CCL196 has a digital display interface "DisplayPort". When using the DisplayPort, up to 1024 or 10 bits shades of gray are simultaneously displayed.

* Customized viewer software and graphics cards are required to display 10-bit images.

Uniformity Equalizer

Luminance uniformity correction system will produce stable images across the screen.

* Images shown are for illustrative purposes only.

User-selectable Monitor Configurations

Luminance/gamma are selectable from three preset settings.

OSD Information Monitor

Current status of the monitor such as total operating hours, actual measurement of luminance and calibration settings are shown on the screen at fingertips.

 

Monitor Status Indicator

Current monitor operating status can easily be checked by the front LED indicator.

Ecological Technology – Considering the Global Environment

JVCKENWOOD is committed to providing high performance monitor systems that are ecological and environmentally friendly. We strive to create green IT initiatives and be a part of building a clean energy future. In an effort to achieve this, we have incorporated several new features in the i2 series monitors. Advanced power saving function dims the backlight as the screensaver activates, thereby reducing power consumption and preventing unnecessary backlight deterioration, resulting in a longer lasting monitor. The internal power supply system includes a new improved power save mode, which allows the monitor to enter standby mode with less than 2 watts of energy consumption.

* Optional software Calibration Kit is required to set up the Advanced Power Savings feature.

Worldwide Medical Safety Standards

MS35i2 meets worldwide medical safety standards.

Technical Specifications

MS35i2

Model Name
MS35i2/AR (AR coating)
MS35i2/F (Protective filter)
MS35i2/N (No protective)
LCD Panel
Technology
21.3-inch , monochrome, TFT, IPS
Display Area
325 mm x 433 mm
Pixel Pitch
0.2115 mm x 0.2115 mm
Contrast Ratio
1400:1 (typ)
Maximum Luminance
1700 cd/m² (typ)
410 cd/m² / 500 cd/m² (Calibrated)
Viewing Angle
176° horizontal and vertical (typ)
Visual Performance
Resolution
1536 x 2048

1536 x 6144 (sub-pixel)
Optional Independent Sub-pixel Drive Technology
Grayscale
256 steps of gray out of a palette of 12277
1276-step simultaneously displayable grayscale in ISD mode with a special viewer
Input Signal
Input Signals
DVI-D (DVI 1.0 compliant)
DisplayPort (DisplayPort 1.1a compliant)
Plug and Play
DDC2B compliant
Power
Power Requirements
100V - 240V, 50/60Hz
Maximum Power Consumption
60W (typ)
Features
Calibration Control
Luminance, Gamma
Capable of storing 3 sets of LUT (An optional Calibration kit is required)
OSD Information Display
Model name, Serial No., Total operating time, Calibration settings (Operating time from last calibration, Luminance, Gamma, etc.), Current luminance, etc.
USB
USB 2.0 compliant, Upstream connector (x1), Downstream connector (x2)
Other Features
Luminance uniformity correction, Hardware pivot, LED indicator, Configurations switching function, Independent Sub-pixel Drive Technology
Approvals
ANSI/AAMI ES60601-1(2005), CAN/CSA C22.2 NO. 60601-1(2008), CE (EN60601-1, EN60601-1-2), FCC class B, VCCI class B, ICES-3-B, FDA510(k), CCC, RCM, J-Moss, RoHS
Physical Characteristics
Dimensions
(W x H x D)
367 x 583 x 220 mm
Weight
12.3 kg
Tilt Stand
Tilt, Swivel, Portrait / Landscape
Mount
VESA standard (100 mm x 100 mm)
Security Slot
Anti-theft security slots (display and tilt stand)
Accessories
Power cord (3P), DVI cable, DisplayPort cable, USB cable, User manual
Cleaning kit*
*AR coating model only
Accessory

MS35i2

Product Support

MS35i2

Graphics cards
Graphics Card
Display performance monitoring software
PM Medivisor
Acceptance and constancy testing software
QA Medivisor
Calibration software
Medivisor Nx