2MP 21.3" Monochrome Monitor MS25i2

MS25i2 MS25i2 MS25i2 MS25i2

High-bright 2MP grayscale Monitors (Optional: Independent Sub-pixel Drive Technology)

High-bright 2MP grayscale monitors for multi modality image viewing including CT, MRI, CR and DR. MS25i2 comes with 5-year standard warranty.


LED Backlight for Image Stability and Energy Saving

Compared to the conventional CCFL backlight models, MS25i2 saves about 20% energy and will hold brightness much longer. Additionally, mercury-free LED backlight contributes to reduce the environmental impacts.

Built-in Sensor

With two built-in sensors for luminance stabilization and ambient light measurement, MS25i2 consistently delivers unmatched image quality.

Remote Calibration

DICOM calibration and conformance check can be remotely performed. These remote management features will minimize the burden of system administrators.

DICOM Conformance Check

User friendly OSD functions include DICOM conformance check function.

Monitor Quality Control

The Medivisor Series software is a user friendly tool to effectively manage JVCKENWOOD's monitors. Calibration software Medivisor Nx, quality assurance software QA Medivisor and performance monitoring software PM Medivisor interact closely with each other to help system administrators easily manage all JVCKENWOOD's monitors in the network.

Special AR Coating for Film-like Black and Improved Sharpness

JVCKENWOOD's new special AR coating technology addresses properties of focus, noise reduction, contrast and viewing angle achieving film-like black and accurate reproduction of images.

DVI & DisplayPort

In addition to a DVI port, MS25i2 has a digital display interface "DisplayPort". When using the DisplayPort, up to 1024 or 10 bits shades of gray are simultaneously displayed.

* Customized viewer software and graphics cards are required to display 10-bit images.

Uniformity Equalizer

Luminance uniformity correction system will produce stable images across the screen.

* Images shown are for illustrative purposes only.

User-selectable Monitor Configurations

Luminance/gamma settings are selectable from three preset levels according to the needs. User-selectable configurations enable stress free operations without specialized settings.

OSD Information Monitor

Current status of the monitor such as total operating hours, actual measurement of luminance and calibration settings are shown on the screen at fingertips.


Monitor Status Indicator

Current monitor operating status can easily be checked by the front LED indicator.

Ecological Technology – Considering the Global Environment

JVCKENWOOD is committed to providing high performance monitor systems that are ecological and environmentally friendly. We strive to create green IT initiatives and be a part of building a clean energy future. In an effort to achieve this, we have incorporated several new features in the i2 series monitors. Advanced power saving function dims the backlight as the screensaver activates, thereby reducing power consumption and preventing unnecessary backlight deterioration, resulting in a longer lasting monitor. The internal power supply system includes a new improved power save mode, which allows the monitor to enter standby mode with less than 2 watts of energy consumption.

* Optional software Calibration Kit is required to set up the Advanced Power Savings feature.

Worldwide Medical Safety Standards

MS25i2 meets worldwide medical safety standards.

Technical Specifications


Model Name
MS25i2/AR (AR coating)
MS25i2/F (Protective filter)
MS25i2/N (No protective)
LCD Panel
21.3-inch , monochrome, TFT, IPS
Display Area
324 mm x 432 mm
Pixel Pitch
0.270 mm x 0.270 mm
Contrast Ratio
1400:1 (typ)
Maximum Luminance
1900 cd/m² (typ)
410 cd/m² (Calibrated)
Viewing Angle
176° horizontal and vertical (typ)
Visual Performance
1200 x 1600

1200 x 4800 (sub-pixel, optional Independent Sub-pixel Drive Technology)
256 steps of gray out of a palette of 12241
1276-step simultaneously displayable grayscale in ISD mode with a special viewer
Input Signals
DVI-D (DVI 1.0 compliant)
DisplayPort (DisplayPort 1.1a compliant)
Plug and Play
DDC2B compliant
Power Requirements
100V - 240V, 50/60Hz
Built-in AC power supply
Maximum Power Consumption
60W (typ)
Calibration Control
Luminance, Gamma
Capable of storing 3 sets of LUT (An optional Calibration kit is required)
OSD Information Display
Model name, Serial No., Total operating time, Calibration settings (Operating time from last calibration, Luminance, Gamma, etc.), Current luminance, Ambient brightness, etc.
USB 2.0 compliant, Upstream connector (x1), Downstream connector (x2)
Other Features
Luminance uniformity correction, Hardware pivot, LED indicator, Configurations switching function, Independent Sub-pixel Drive Technology
Approvals*Please contact JVC for latest information.
ANSI/AAMI ES60601-1(2005) + A1 (2012), CAN/CSA C22.2 NO. 60601-1(2014), CE (EN60601-1, EN60601-1-2), FCC Part15 subpart B Class B, VCCI-B, FDA510(k), RCM, J-Moss, RoHS, EAC
Physical Characteristics
(W x H x D)
367 x 583 x 220 mm
12.3 kg
Tilt Stand
Tilt, Swivel, Portrait / Landscape
VESA standard (100 mm x 100 mm)
Security Slot
Anti-theft security slots (display and tilt stand)
Power cord (3P), DVI cable, DisplayPort cable, USB cable, User manual
Cleaning kit*
*AR coating model only


Product Support


Graphics cards
Graphics Card
CAL-016 (Calibration Kit)
Calibration and QA testing software and Calibration sensor
CAL-016 (Calibration Kit)
PM Medivisor (PM-001A)
Display performance monitoring software
PM Medivisor (PM-001A)
QA Medivisor
Acceptance and constancy testing software
QA Medivisor
Medivisor Nx
Calibration software
Medivisor Nx